Audio-Technica ATW-3211N892XTH 3000 Series Wireless Headworn Microphone System (Network-Enabled)

The Audio-Technica ATW-3211N892XTH 3000 Series Wireless Headworn Microphone System (Network-Enabled) is a professional-grade audio solution designed for clear signal transmission and reliable performance. This system integrates advanced networking capabilities with high-fidelity sound capture to support demanding audio environments.

Core System Components

The ATW-3211N892XTH package consists of the ATW-R3210N network-enabled receiver and the ATW-T3201 body-pack transmitter. These components work together to provide stable signal management and transmission. The inclusion of the BP892xcH-TH MicroSet ensures clear vocal reproduction through an omnidirectional condenser headworn microphone finished in a discreet beige color.

High-Fidelity Microphone Technology

The BP892xcH-TH MicroSet features an omnidirectional polar pattern, which allows for consistent sound pickup regardless of the microphone's orientation to the speaker's mouth. The condenser element is designed to capture natural audio with high clarity, making it suitable for presenters and performers who require a low-profile, headworn solution.

Included Accessories and Configuration

This system includes several essential accessories to optimize performance, protect the hardware, and improve user comfort:

Element Covers: Protect the microphone capsule from environmental factors.
Windscreens: Reduce vocal plosives and wind noise during operation.
Clothing Clip: Facilitates secure cable management for the user.
Dual-Ear Adapter Kit: Provides an alternative mounting configuration to increase stability during active use.

Operating Frequencies	UHF Band D: 656.125 to 678.500 MHz, Band I: 487.125 to 506.500 MHz, Band S: 508.125 - 526.825 MHz
Modulation Mode	FM
Maximum Deviation	±40 kHz
Frequency Response	100 Hz to 15 kHz (+1 dB, -3 dB)
Operating Range	100 m (300'), typical - Open range environment with no interfering signals.
Total Harmonic Distortion	< 1% (at 1 kHz, ±20 kHz deviation)
Operating Temperature Range	5º C to 45º C, 41º F to 113º F, Battery and LCD performance may be reduced at very low temperatures.
Number Of Channels	10 total
Handheld Transmitter
RF Power Output	High: 30 mW; Low: 10 mW (switchable), at 50 ohms
Spurious Emissions	Following federal and national regulations
Microphone Element	Dynamic cardioid
Battery Type	Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
Recharging Power for NiMH Batteries (with ATW-CHG2)	U.S./Canada/Latin America: 3.2 V DC, 230 mA x2; Other world areas: 3.2 V DC, 320 mA x2
Battery Life	High: 7 hours (alkaline); Low: 9 hours (alkaline). Depending on battery type and use pattern.
Dimensions	232.0 mm (9.13") long, 48.0 mm (1.89") diameter
Net Weight	252 g (8.9 oz), without batteries
Accessories Included	AT8456a Quiet-Flex™ stand clamp
Body Pack
RF Power Output	High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life	High: 7 hours (alkaline); Low: 9 hours (alkaline). Depending on battery type and use pattern.
Battery Type	Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
Recharging Power for NiMH Batteries (with ATW-CHG2)	U.S./Canada/Latin America: 3.2 V DC, 230 mA x2; Other world areas: 3.2 V DC, 320 mA x2
Dimensions	66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H
Input Connections	Four-pin Locking Connector — Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Net Weight	81 g (2.9 oz), without batteries
Spurious Emissions	Following federal and national regulations
Receiver
Receiving System	True diversity
Image Rejection	60 dB nominal, 55 dB minimum
RF Sensitivity	20 dBuV at 60 dB S/N ratio (50 ohms termination)
Maximum Output Level	XLR, balanced: +9 dBV, ¼" (6.3 mm), unbalanced: +4 dBV
Antenna Input	BNC-type, 50 ohms, Bias voltage 12V DC, 60 mA, each
Power Requirements	12-18V DC, 500 mA
Dimensions	210.0 mm (8.27") W x 162.2 mm (6.39") D x 44.0 mm (1.73") H. Not including BNC connectors or feet.
Weight	1.0 kg (35.3 oz), without accessories
Accessories Included	Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Audio Output Attenuator (ATTN)	Balanced Audio Output Attenuator: Two position switch: 0 / -12 dB