Interpretation unit for ATUC-50 Digital Discussion System
| Cable Type (System Connection) | Cat5e or higher Ethernet cable (straight-through) |
| Audio Latency (System) | <1 ms |
| Interpreter Positions Supported | 1 per unit |
| Signal-to-Noise Ratio (S/N) | >90 dB |
| Headphone Output Power | 100 mW + 100 mW (into 16 ohms) |
| Operating Humidity Range | 20% to 90% RH (non-condensing) |
| Power Supply | DC 24V (supplied via RJ45 from ATUC-50CU) |
| Microphone Input Connector | 1 x XLRF-type (for interpreter microphone) |
| Audio Sampling Rate | 48 kHz |
| Display Type | LCD (for language indication) |
| Audio Bit Depth | 24-bit |
| Storage Temperature Range | -20°C to 50°C (-4°F to 122°F) |
| Controls | Language selection buttons (A, B, C, Floor), Headphone volume control, Mute button, Relay button |
| Frequency Response | 20 Hz to 20 kHz |
| Headphone Output Connector | 2 x 3.5 mm (1/8") stereo mini jack |
| System Compatibility | Audio-Technica ATUC-50 Digital Discussion System |
| Maximum Cable Length (to CU) | 100 meters (328 feet) |
| Total Harmonic Distortion (THD+N) | <0.002% |
| Color | Black/Silver |
| Operating Temperature Range | 0°C to 40°C (32°F to 104°F) |
| Chassis Material | ABS resin with metal base |
| Mounting Type | Desktop |
| Number of Interpretation Channels | 3 (plus 1 floor channel) |
| Product Type | Digital Interpretation Unit |
| System Connection | 1 x RJ45 (for ATUC-50CU Central Unit) |
| Power Consumption | Approximately 3.5 W |
| Length | 8 In. |
|---|---|
| Width | 8 In. |
| Height | 6 In. |
| Weight | 2 lbs |
Have you purchased this product?
No reviews yet
Be the first to review this product!
